Heritage Premium Small Direct Vent Cast Iron Stove (Millivolt/Pilot) - Empire Comfort Systems

Heritage Premium Small Direct Vent Cast Iron Stove (Millivolt/Pilot) - Empire Comfort Systems
Heritage Premium Small Direct Vent Cast Iron Stove (Millivolt/Pilot) - Empire Comfort Systems
Price: $2,899.00
SKU: DVP20CC30F/B/MN/P

Product Information


Direct-vent Heritage Stoves come standard with Empire's Slope Glaze Burner system with expanded ember bed for extra glow. Ceramic beads within the burner swirl and tumble the gas to create naturally swirling flames that are indistinguishable from a wood fire. Topped off with the hand-painted ceramic fiber log set and glowing embers, the effect is stunningly realistic and guaranteed to keep you and your guests mesmerized for hours.

Heritage Stoves are available in two types of ignition - Millivolt (MV) and Intermittent Pilot (IP). The Millivolt system lights a standing pilot with a push button piezo ignitor. Once the standing pilot is lit, the MV system operates with an on/off switch concealed on the back of the burner or with one of the optional remote control systems listed on the back of this brochure. The standing pilot allows your Heritage stove to provide heat during power outages. IP systems eliminate the standing pilot for even greater energy savings. Pressing the on/off switch ignites the pilot, which then ignites the main burner. IP systems can also operate with an optional remote control system. Includes AC adaptor with battery backup. The continuous pilot switch allows your Heritage stove to provide heat during extended power outages.

Heritage direct-vent models use standard 4" x 6 5/8" vent pipe and generate sufficient heat to warm any room in your home or provide total heat for a small cabin. A direct-vent system draws in outdoor air to support combustion and sends its exhaust directly outdoors. The versatile direct- vent technology allows your dealer to install your stove with vertical or horizontal venting. All DV Heritage installations require a 45˚ elbow.

Empire Heritage Vent Free Cast Iron Stove Finishes

Product Specifications

SHOWN WITH
  • Matte Black Finish (optional)
  • Maching side shelves (optional)
  • Black Vent Pipe (not included)
STANDARD FEATURES
  • Empire contour burner system
  • Millivolt ignition - standing pilot
  • Remote ready
  • Manual variable flame height
  • Ceramic log set
  • Rock wool
BURNER AND LOG SPECIFICATIONS
  • Empire contour burner system
  • Ember bed
  • Millivolt ignition - standing pilot
  • Manual variable flame height
  • Remote ready
  • 4 Piece ceramic log set
  • Manufactured for indoor use
  • Btu/Hr - 13,500 - 19,500 (NAT)
  • Btu/Hr - 13,500 - 19,500 (LP)
VENTING SPECIFICATIONS
  • Requires 4" x 5 6/8" venting
  • Requires a 45˚ elbow for all venting solutions
  • Approved for installation with Simpson Dura Vent
  • Venting materials are not provided with this appliance and must be purchased separately
  • Please be sure to check with the manufacturers installation guide for venting solutions
  • Please note that a 25% restocking fee applies to all returned venting products

Product Dimensions


  • Overall dimensions - 21 1/2" W (front) x 24 1/8" H x 15 3/8" D x 21 1/2" W (rear)
  • Side Shelf dimensions - 32 3/4" W
  • Weight - 170 lbs.


Product Warranty


ATTENTION - As of March 1, 2013 Empire will no longer honor this products warranty
if the unit is not installed by a licnesed proffesional.
Installation in part or whole by an unlicensed person will fully void the below warranty.

  • All direct vent products carry a (3) three year limited parts warranty. This warranty does not cover labor.
  • Warranty is only valid if installation is performed by a licensed professional.


Product Shipping


  • In stock products ship within 1-2 business days.
  • Transit times typically vary from 1-6 business days.
  • This product must ship LTL freight and a signature is required for delivery.
  • Please be sure to inspect all freight shipments carefully and note any damages or missing items on the delivery receipt.
  • In the event of possible concealed damage, freight customers MUST write "Pending Inspection" next to their signature on the delivery receipt. Failure to write "Pending Inspection" on the delivery receipt will bar the customer from recovery for undiscovered/concealed damage, after the fact.


Product Reviews
Rate this product:

DirectVentFireplaceStore.com by JBS Retail - Copyright © 2024 All Rights Reserved